| No. | Brand | K | M | N | F | J | A | C | G |
| PAK1-1/4-206-N | INA | - | - | - | - | - | 320 mm | - | - |
| NA22/6-X-2RSR | INA | - | - | - | - | - | - | 203.2 mm | - |
| WS81130 | INA | - | - | - | - | 101.5 mm | - | - | - |
| 06Y36 | INA | - | - | - | - | - | - | - | - |
| 3303-J | INA | - | - | - | - | - | - | - | - |
| GS81207 | INA | - | - | - | - | - | - | - | - |
| NNTR130X310X146-2ZL | INA | - | - | 14 mm | - | - | 34.5 mm | - | - |
| 61800-2RSR-VA | INA | - | - | - | - | - | - | - | - |
| SL12926 | INA | - | - | - | - | - | - | - | - |
| SL181864-E-C3 | INA | - | - | - | - | - | - | - | M 39x3 |
| K35X45X20 | INA | - | - | - | - | - | - | - | - |
| RASE60N | INA | - | - | - | - | - | - | - | - |
| SL045020-PP-C3 | INA | - | - | - | - | - | - | - | - |
| SL192312-C3 | INA | - | - | - | - | - | - | - | - |
| SL183052-TB | INA | - | - | - | - | - | - | - | - |
| SL183020-C3 | INA | - | - | - | - | - | - | - | - |
| GIKL20-PW | INA | - | - | - | - | - | - | - | - |
| KRV72-PP-X | INA | - | - | - | - | - | 10 mm | - | - |
| 3307-J-2Z | INA | - | - | - | - | - | - | - | - |
| TWC815 | INA | - | - | - | - | - | - | - | - |
| NATV5 | INA | - | - | - | - | - | - | - | - |
| IR65X72X25 | INA | - | - | - | - | - | - | - | 279.502 mm |
| IR17X20X16.5 | INA | - | - | - | - | - | - | - | - |
| INA TWA1220 Thrust Roller Bearing | Reference speed:240 r/min; r1,2 min.:7.5 mm; d2 ≈:804 mm; ra max.:6 mm; B2 ≈:409 mm; Limiting speed:500 r/min; B:336 mm; Basic dynamic load rating C:13101 kN; K:12 mm; Mass bearing + sleeve:1430 kg; |
| 6.299 Inch | 160 Millimeter x 9.449 Inch | 240 Millimeter x 4.331 Inch | 110 Millimeter INA SL06032-E Cylindrical Roller Bearings | d:3.200 mm; Basic Static Radial Load Rating Co:120 N; D:9.5000 mm; Oil Speed Rating Open/Shielded n2:91000 rpm; Basic Dynamic Radial Load Rating C:312 N; Accessories:One Seal; Grease Speed Rating Open/Shielded n1:75000 rpm; Sealed Speed Rating n3:52000 rpm; Fillet Radius ra:0.30 mm; Width Plain B:4.0 mm; Size (mm):6.299 Inch | 160 Millimeter x 9.449 Inch | 240 Millimeter x 4.331 Inch | 110 Millimeter ; |
| INA GAR10-UK Spherical Plain Bearings - Rod Ends | Fillet Radius ra:1.00 mm; Oil Speed Rating n2:50000 rpm; Basic Dynamic Radial Load Rating C:13000 N; Grease Speed Rating n1:35000 rpm; d:20.000 mm; D:47.0000 mm; B:14.00 mm; Fillet Radius rb:0.60 mm; Basic Static Radial Load Rating Co:7800 N; |
| 0.866 Inch | 22 Millimeter x 1.142 Inch | 29 Millimeter x 0.63 Inch | 16 Millimeter INA KZK22X29X16 Needle Non Thrust Roller Bearings | db min.:59.6 mm; Calculation factor f0:10.4; Mass bearing:0.15 kg; Da max.:75.4 mm; d1:62.7 mm; Attainable speed for grease lubrication:19000 r/min; d2:62.7 mm; Calculation factor f2B:1.07; Static axial stiffness, preload class D:140 N/µm; d:55 mm; Size (mm):0.866 Inch | 22 Millimeter x 1.142 Inch | 29 Millimeter x 0.63 Inch | 16 Millimeter ; |
| INA GS87410 Thrust Roller Bearing | l7 min.:98 mm; Specific dynamic load factor K:150 N/mm²; α:5 °; Basic dynamic load rating C:600 kN; d2 max.:182 mm; h:270 mm; Mass rod end:12 kg; B:55 mm; C1 max.:48 mm; Basic static load rating C0:585 kN; |
| INA NATR12-X Cam Follower and Track Roller - Yoke Type | B:57.15 mm; D:120.7000 mm; Oil Mist Speed Rating Max. n3:7000 rpm; Fillet Radius ra:2.00 mm; Keyway e:58.4 mm; X-L-O Part Number:115-47; Keyway f:4.7 mm; Grease Speed Rating Max. n1:3000 rpm; Oil Speed Rating Max. n2:4500 rpm; Preload:150 lb; |
| INA GS81117 Thrust Roller Bearing | a:33.358 mm; Calculation factor Y0:0.9; da max.:81 mm; Limiting speed:4800 r/min; rb max.:2.5 mm; Basic dynamic load rating C:323 kN; Da min.:117 mm; Calculation factor Y:1.7; d1 ≈:99.2 mm; db min.:78 mm; |
| INA GIHRK80-DO Spherical Plain Bearings - Rod Ends | d3:75 mm; Hydraulic nut:HMV 11 E; d1:50 mm; G:M 55x2; d:55 mm; Lock nut:KMFE 11; B1:45 mm; B:14 mm; Mass adapter sleeve assembly:0.34 kg; |
| INA NATV5 Cam Follower and Track Roller - Yoke Type | Fatigue load limit Pu:39 kN; Operating clearance factor k2:0.096; da max.:68.7 mm; s2 max.:0.5 mm; Basic dynamic load rating C:190 kN; Mass bearing:0.83 kg; Misalignment factor k1:0.108; B:45 mm; d2 ≈:68.7 mm; Da max.:80.4 mm; |
| INA KRVE40-PP Cam Follower and Track Roller - Stud Type | End plug (suffix Y):EPR 10; Mass pillow block:30.4 kg; Cap bolt recommended tightening torque:515.2 N·m; RG:3/8 NPT; R2:26.988 mm; da:80 mm; PG:1/8 NPT; H1:107.95 mm; N1:22.225 mm; L:361.95 mm; |
| 9.449 Inch | 240 Millimeter x 14.173 Inch | 360 Millimeter x 5.118 Inch | 130 Millimeter INA SL05048-E Cylindrical Roller Bearings | G:169.139 mm; B4:30.175 mm; B1:101.829 mm; Threads per inch:8; Lock nut:N 034; d:170 mm; Lock washer:W 034; d1:147.637 mm; Sleeve:S 3034x5.13/16; Hydraulic nut:HMVC 34E; Size (mm):9.449 Inch | 240 Millimeter x 14.173 Inch | 360 Millimeter x 5.118 Inch | 130 Millimeter ; |
| INA NATV5-X-PP Cam Follower and Track Roller - Yoke Type | Oil Speed Rating n2:4300 rpm; B:61.90 mm; Sealed Speed Rating n3:3200 rpm; Basic Dynamic Radial Load Rating C:154000 N; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:3200 rpm; d:65.000 mm; Accessories:No Shield, no Seal,; Basic Static Radial Load Rating Co:163000 N; D:140.0000 mm; |
| INA GAL17-DO Spherical Plain Bearings - Rod Ends | B:40 mm; α:4 °; Basic static load rating C0:176 kN; C1 max.:34 mm; Size bolt with internal hexagon:M 10; Basic dynamic load rating C:100 kN; d:40 mm; Tightening torque bolt with internal hexagon:46 N·m; l4 max.:146.5 mm; r1 min.:0.6 mm; |
| 0.625 Inch | 15.875 Millimeter x 0.813 Inch | 20.65 Millimeter x 0.75 Inch | 19.05 Millimeter INA SCE1012-PPR Needle Non Thrust Roller Bearings | with tapered bore:1 800 min-1; Static (Cor):11.1 mm; B:86 mm; D:260 mm; with cylindrical bore:1 400 min-1; Pu:938 kN; d:120 mm; Grease:1180 kN; Oil:118.700 kN; Dynamic (Cr):6 mm; Size (mm):0.625 Inch | 15.875 Millimeter x 0.813 Inch | 20.65 Millimeter x 0.75 Inch | 19.05 Millimeter ; |
| INA LFR5206-20-2Z Cam Follower and Track Roller - Yoke Type | Limiting speed:2600 r/min; da max.:148 mm; Calculation factor Y:1.7; Calculation factor e:0.35; rb max.:3 mm; Basic dynamic load rating C:855 kN; r1,2 min.:4 mm; a:59.667 mm; Mass bearing:21.4 kg; D:260 mm; |
| INA 03Y10 Thrust Ball Bearing | B:9.00 mm; Fillet Radius ra:0.30 mm; D:32.0000 mm; Basic Static Radial Load Rating Co:2850 N; Accessories:Snap-Ring; Sealed Speed Rating n3:14000 rpm; Grease Speed Rating Open/Shielded n1:22000 rpm; d:15.000 mm; Oil Speed Rating Open/Shielded n2:28000 rpm; Basic Dynamic Radial Load Rating C:5590 N; |
1.188 Inch | 30.175 Millimeter x 1.406 Inch | 35.712 Millimeter x 1.563 Inch | 39.7 Millimeter INA PAK1-3/16-N Pillow Block Bearings Video
PAK1-15/16-N - INA | Ložiskové domce s ložiskom | BDI Slovakia
2 Bolt Pillow Block; 1-15/16" Bore; 2-3/16" Base to Center Height; Eccentric Collar Mount; Ball Bearing; 5.965" Minimum Bolt Spacing; 6.437" Bolt Spacing ...
PAK1-3/16-N | PAK Series Ball Bearing Pillow Block | Applied
Shop Ina USA Corp. PAK1-3/16-N at Applied.com, which includes; Normal-Duty Pillow Block, 1 3/16" Shaft, 1 9/16" Center Line to Base, 4.617" Bolt Hole ...
Article Structure of PAK1 in an Autoinhibited Conformation ...
by M Lei · 2000 · Cited by 637 — PAKs 1–3 have an N-terminal half that includes autoregulatory and ... domain of PAK1 that accompanies binding with Cdc42. Viewed as in A, ...
Cyclin-Dependent Kinase 5 and Neuronal Migration in the ...
neurons specifically express the N-cadherin subfamily on their cell surface, indicating that ... (Pak1). When Pak1 is present in a tripartite protein com-.
16-kDa Prolactin Inhibits Endothelial Cell Migration by Down
Regulating the Ras-Tiam1-Rac1-Pak1 Signaling Pathway. Sok-Hyong Lee,1 Jeannette Kunz,5 ... endothelial cell (RAEC) migration in a wound-healing assay.10 pages
Full article: Design, synthesis and biological evaluation of ...
by D Yao · 2020 — The PAK1 inhibitory activity of compounds 7a–n. ... smaller dose (2.5 μM and 5 μM), but suppressed PAK1 expression in a larger dose (10 μM).
The role of p21-activated kinases (PAKs) in glucose ... - bioRxiv
Feb 7, 2019 — Number of mice in each group: Control-HFD 60E%, n = 7/7 (female/male); ... I PAKs (PAK1-3) (16,30) and is expected to inhibit both PAK1 and ...
Genetic Evidence for Pak1 Autoinhibition and Its Release by ...
by H Tu · 1999 · Cited by 118 — Pak1-Reg, which encodes the N-terminal 284 amino acids, was made with the ... CLA4 (7), and three major mammalian PAK isoforms (3, 16, 21) are aligned, ...