| No. | Brand | K | M | N | F | J | A | C | G |
| PAK1-1/4-206-N | INA | - | - | - | - | - | 320 mm | - | - |
| STO17 | INA | - | - | - | - | - | - | - | - |
| 3312-2RSR | INA | - | - | - | - | - | - | - | - |
| EW1MM | INA | - | - | - | - | - | - | - | - |
| AS140180 | INA | - | - | - | - | - | - | - | - |
| LFR5206-25-2Z | INA | - | - | - | - | - | - | - | - |
| 3002-B-2RS-TVH | INA | - | - | - | - | - | - | - | - |
| 03N10-TN | INA | - | - | - | - | - | - | - | - |
| IR40X50X20-IS1 | INA | - | - | - | - | - | 8 mm | - | Tr 750x7 |
| NA2200-X-2RSR | INA | - | - | - | - | - | - | 16 mm | - |
| 06Y36 | INA | - | - | - | - | - | - | - | - |
| LR35X40X16.5 | INA | - | - | - | - | - | - | - | - |
| IR80X90X25 | INA | - | - | - | - | - | - | - | - |
| IR10X14X12-IS1 | INA | - | - | - | - | - | - | - | - |
| SL181864-E-C3 | INA | - | - | - | - | - | - | - | M 39x3 |
| RTL7 | INA | - | - | - | - | - | - | - | - |
| PWTR45-2RS | INA | - | - | - | - | - | - | - | - |
| NUKR52 | INA | - | - | - | - | - | - | - | - |
| TWC815 | INA | - | - | - | - | - | - | - | - |
| GS81207 | INA | - | - | - | - | - | - | - | - |
| SL045020-PP-C3 | INA | - | - | - | - | - | - | - | - |
| NX20 | INA | - | - | - | - | - | - | - | - |
| RCJT1-15/16-N | INA | - | - | - | - | - | - | - | - |
| RAK15/16 | INA | - | - | - | - | - | - | - | - |
| WS81102 | INA | - | - | - | - | - | - | - | - |
| KR19-X | INA | - | - | - | - | - | - | - | - |
| RAK60 | INA | - | - | - | - | - | - | - | M 140x2 |
| AS1024 | INA | - | - | - | - | - | - | - | - |
| INA GT3-TN Thrust Ball Bearing | Calculation factor e:0.22; Limiting speed:480 r/min; Fatigue load limit Pu:1100 kN; K:12 mm; d:750 mm; D1 ≈:916 mm; r1,2 min.:6 mm; Basic static load rating C0:18000 kN; Mass bearing:550 kg; Calculation factor Y0:2.8; |
| 1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.748 Inch | 44.4 Millimeter INA 3310 Angular Contact Ball Bearings | Grease:3720 kN; D:460 mm; Static (Cor):16.7 mm; Dynamic (Cr):9 mm; B:118 mm; with tapered bore:1 000 min-1; with cylindrical bore:800 min-1; Oil:303.940 kN; d:300 mm; Pu:2020 kN; Size (mm):1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.748 Inch | 44.4 Millimeter ; |
| INA 05Y05 Thrust Ball Bearing | Cap bolt:5/8-11 UNC; P90°:84.5 kN; H2:44.45 mm; Housing:SSAFS 024 KA; P180°:57.4 kN; Adapter sleeve assembly:SNW 3024x4.3/16; Cap bolt recommended tightening torque:298.3 N·m; A2:155.575 mm; H1:114.3 mm; PG:1/4 NPT; |
| 1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.748 Inch | 44.4 Millimeter INA 3310-2Z-C3 Angular Contact Ball Bearings | Fillet Radius ra:2.00 mm; d:50.000 mm; Grease Speed Rating n1:5300 rpm; Basic Dynamic Radial Load Rating 40º C1:87100 N; Basic Static Radial Load Rating 15º Co1:72000 N; Oil Speed Rating n2:7000 rpm; B:54.00 mm; D:110.0000 mm; Shielded or Sealed Co2:52000 N; Fillet Radius rb:1.00 mm; Size (mm):1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.748 Inch | 44.4 Millimeter ; |
| INA NATR12-X-PP Cam Follower and Track Roller - Yoke Type | Pa:28.5 kN; Mass pillow block:94.3 kg; A2:193.675 mm; R1:87.313 mm; RG:3/4 NPT; Cap bolt, SAE grade:8; L:511.175 mm; Max. speed for PosiTrac Plus seal:1150 r/min; ba:61.119 mm; R2:38.1 mm; |
| 5.512 Inch | 140 Millimeter x 7.48 Inch | 190 Millimeter x 1.969 Inch | 50 Millimeter INA SL014928-C3 Cylindrical Roller Bearings | B:34.1 mm; L:95 mm; Mass bearing unit:0.38 kg; Limiting speed:7000 r/min; Basic static load rating C0:7.8 kN; Basic dynamic load rating C:14 kN; N:12.3 mm; J:70 mm; Recommended diameter for attachment bolts, inch G:0.375 in; Bearing:YAR 205-015-2RF/VE49; Size (mm):5.512 Inch | 140 Millimeter x 7.48 Inch | 190 Millimeter x 1.969 Inch | 50 Millimeter ; |
| 5.118 Inch | 130 Millimeter x 7.874 Inch | 200 Millimeter x 3.74 Inch | 95 Millimeter INA SL045026-PP-2NR Cylindrical Roller Bearings | d:38 mm; db min.:48 mm; Calculation factor Y0:0.8; da max.:44 mm; Calculation factor Y:1.4; Calculation factor e:0.43; Ca min.:3 mm; T:17 mm; r3,4 min.:1.3 mm; Da max.:56 mm; Size (mm):5.118 Inch | 130 Millimeter x 7.874 Inch | 200 Millimeter x 3.74 Inch | 95 Millimeter ; |
| 8.661 Inch | 220 Millimeter x 11.811 Inch | 300 Millimeter x 3.15 Inch | 80 Millimeter INA SL184944-C3 Cylindrical Roller Bearings | Accessories:One Shield & Snap-Ri; D:100.0000 mm; Fillet Radius ra:1.50 mm; B:25.00 mm; Grease Speed Rating Open/Shielded n1:5700 rpm; Oil Speed Rating Open/Shielded n2:7000 rpm; Basic Static Radial Load Rating Co:46500 N; Basic Dynamic Radial Load Rating C:59400 N; d:45.000 mm; Size (mm):8.661 Inch | 220 Millimeter x 11.811 Inch | 300 Millimeter x 3.15 Inch | 80 Millimeter ; |
| INA GAL17-DO Spherical Plain Bearings - Rod Ends | B:40 mm; α:4 °; Basic static load rating C0:176 kN; C1 max.:34 mm; Size bolt with internal hexagon:M 10; Basic dynamic load rating C:100 kN; d:40 mm; Tightening torque bolt with internal hexagon:46 N·m; l4 max.:146.5 mm; r1 min.:0.6 mm; |
| INA TWB2031 Thrust Roller Bearing | Pa:710 kN; P90°:1300 kN; Q150°:1040 kN; L:560 mm; Mass housing:97.5 kg; Eye bolt, size:2 x M 20; Oil level, min.:53 mm; P55°:2700 kN; P0°:2200 kN; A1:210 mm; |
| 2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 2.126 Inch | 54 Millimeter INA 3312-2Z Angular Contact Ball Bearings | l5 ≈:45 mm; l7 min.:88 mm; B:55 mm; Basic static load rating C0:655 kN; α:6 °; Material constant KM:330; h1:295 mm; l3 min.:85 mm; d4 ≈:105 mm; C1 max.:48 mm; Size (mm):2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 2.126 Inch | 54 Millimeter ; |
| 0.984 Inch | 25 Millimeter x 2.441 Inch | 62 Millimeter x 1 Inch | 25.4 Millimeter INA 3305-2Z-E Angular Contact Ball Bearings | Sealed Speed Rating n3:19000 rpm; Accessories:Without Accessories; Oil Speed Rating Open/Shielded n2:36000 rpm; B:8.00 mm; Fillet Radius ra:0.30 mm; d:10.000 mm; Grease Speed Rating Open/Shielded n1:30000 rpm; Basic Static Radial Load Rating Co:1960 N; D:26.0000 mm; Basic Dynamic Radial Load Rating C:4620 N; Size (mm):0.984 Inch | 25 Millimeter x 2.441 Inch | 62 Millimeter x 1 Inch | 25.4 Millimeter ; |
| INA WS81130 Thrust Roller Bearing | J:101.5 mm; Recommended diameter for attachment bolts, inch G:0.5 in; Recommended diameter for attachment bolts, mm G:12 mm; A5:23.5 mm; Thread grub screw G2:M6; Db:98 mm; s1:25.9 mm; Basic static load rating C0:19 kN; Da:115.9 mm; End cover:ECY 208; |
| 2.362 Inch | 60 Millimeter x 3.063 Inch | 77.8 Millimeter x 2.689 Inch | 68.3 Millimeter INA RAK60 Pillow Block Bearings | Locking device:MBL 28; Mass adapter sleeve assembly:2.8 kg; G:M 140x2; d:140 mm; B1:82 mm; d1:127 mm; B:22 mm; Hydraulic nut:HMV 28 E; d3:165 mm; B4:24 mm; Size (mm):2.362 Inch | 60 Millimeter x 3.063 Inch | 77.8 Millimeter x 2.689 Inch | 68.3 Millimeter ; |
| INA FT8-M-K Thrust Ball Bearing | A2:171.45 mm; P150°:15.6 kN; H1:69.85 mm; P120°:17.3 kN; H2:23.813 mm; h:31.75 mm; L:244.475 mm; Taconite seal:TER 24; S:4.763 mm; P90°:27.1 kN; |
| INA 06J01 Thrust Ball Bearing | F:540 mm; Fatigue load limit Pu:1800 kN; D:670 mm; Mass bearing:465 kg; K:9 mm; D1 ≈:612 mm; α:20 °; B:480.5 mm; r3,4 min.:5 mm; b:16.7 mm; |
INA GAR30-DO-2RS Spherical Plain Bearings - Rod Ends Video
GAR30-DO-2RS INA - ABF Store
GAR30-DO-2RS INA available at ABF.store ✓ Same-day shipment ✓ 10.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8 ...
GAR30-DO-2RS | INA (Schaeffler) - MISUMI
Rod ends GAR..-DO-2RS, with external thread, requiring maintenance, - DIN ISO 12 240-4, lip seals on both sides, right hand thread (INA (Schaeffler)) (GAR30-DO- ...
INA GAR30-DO-2RS - SP-SpareParts
Buy GAR30-DO-2RS manufactured by INA. Inner Diameter: 30, Outer Diameter: 73, Width: 22, Weight: 890. a.k.a. EA30-2RS (ASKUBAL).
GAR30-DO-2RS Rod Ends dimensions - Tradebearings
high quantities GAR30-DO-2RS Bearing dimension: 30x73x22, Enquiry for ... Reference From INA (Schaeffler) GAR30-DO-2RS Male Threaded Right Hand Rod End;
INA GAR30-DO-2RS Rod End 4012802525182 | eBay
With External Thread To Din Iso 12 240-4 Lip Seals On Both Sides Right Hand Thread.
GAR30-DO-2RS - INA | Spherical Plain Bearings - Rod Ends
30MM Bore; 19MM House Width; Male Stud Profile; M30 X 2; Right Hand Thread Direction; Spherical Plain Bearing; Steel Outer Member; Steel Ball; Steel L.
GAR30-DO Rod end - Schaeffler medias
Rod end. Rod end with external thread, right hand thread, requiring maintenance, sliding contact surface: steel/steel, DIN ISO 12240-4, dimension series E, ...
INA - GAR30-DO-2RS - VW Impex
Choose your currency. INR ( ₹ ) USD ( $ ). This will allow you to see all price in your selected currency. MENU. Open submenu (Ball bearings)Ball bearings ...