| No. | Brand | K | M | N | F | J | A | C | G |
| IR17X20X16.5 | INA | - | - | - | - | - | - | - | - |
| NATV5-X-PP | INA | - | - | - | - | - | - | - | - |
| KRVE47-PP | INA | - | - | - | - | - | - | - | - |
| IR90X100X26 | INA | - | - | - | - | - | - | - | - |
| 3308-2RSR | INA | - | - | - | - | - | - | - | - |
| NATR12-X | INA | - | - | - | - | - | - | - | - |
| IR10X14X12-IS1 | INA | - | - | - | - | - | - | - | - |
| 06J01 | INA | 9 mm | - | - | 540 mm | - | - | - | - |
| IR85X95X36 | INA | - | - | - | - | - | - | - | - |
| EW1MM | INA | - | - | - | - | - | - | - | - |
| G1008-KRR-B | INA | - | - | - | - | - | - | - | - |
| 61906-2RSR | INA | - | - | - | - | - | - | - | - |
| 3305-2Z-E | INA | - | - | - | - | - | - | - | - |
| AS140180 | INA | - | - | - | - | - | - | - | - |
| GIKL20-PW | INA | - | - | - | - | - | - | - | - |
| GAKL16-PW | INA | - | - | - | 766 mm | - | - | - | - |
| GS81220 | INA | - | - | - | - | - | - | - | - |
| NATV12-PP | INA | - | - | - | - | - | - | - | - |
| 3002-B-2RS-TVH | INA | - | - | - | - | - | - | - | - |
| IR40X50X20-IS1 | INA | - | - | - | - | - | 8 mm | - | Tr 750x7 |
| 61807-2Z | INA | - | - | - | - | - | - | - | - |
| SL183020-C3 | INA | - | - | - | - | - | - | - | - |
| INA KR47-PP Cam Follower and Track Roller - Stud Type | db min.:64 mm; Db min.:98 mm; D:104.775 mm; B:40.157 mm; Basic static load rating C0:224 kN; Limiting speed:6300 r/min; Da min.:87 mm; Calculation factor e:0.33; r3,4 min.:3.3 mm; a:27.26 mm; |
| INA RTL7 Thrust Roller Bearing | Mass pillow block:41.1 kg; ba:42.069 mm; H:230.981 mm; da:77.787 mm; Cap bolt recommended tightening torque:515.2 N·m; Cap bolt:2 x 3/4-10 UNC; J1:57.15 mm; J min.:304.8 mm; Cap bolt, SAE grade:8; H1:120.65 mm; |
| 5.118 Inch | 130 Millimeter x 7.874 Inch | 200 Millimeter x 3.74 Inch | 95 Millimeter INA SL045026-PP-2NR Cylindrical Roller Bearings | d:38 mm; db min.:48 mm; Calculation factor Y0:0.8; da max.:44 mm; Calculation factor Y:1.4; Calculation factor e:0.43; Ca min.:3 mm; T:17 mm; r3,4 min.:1.3 mm; Da max.:56 mm; Size (mm):5.118 Inch | 130 Millimeter x 7.874 Inch | 200 Millimeter x 3.74 Inch | 95 Millimeter ; |
| 1.378 Inch | 35 Millimeter x 1.575 Inch | 40 Millimeter x 0.65 Inch | 16.5 Millimeter INA LR35X40X16.5 Needle Non Thrust Roller Bearings | B:25.00 mm; Grease Speed Rating n1:6700 rpm; Basic Static Radial Load Rating Co:31500 N; Oil Speed Rating n2:8000 rpm; Grease Speed Rating Open/Shielded n1:6700 rpm; Accessories:Snap-Ring; D:100.0000 mm; Oil Speed Rating Open/Shielded n2:8000 rpm; Basic Dynamic Radial Load Rating C:52700 N; d:45.000 mm; Size (mm):1.378 Inch | 35 Millimeter x 1.575 Inch | 40 Millimeter x 0.65 Inch | 16.5 Millimeter ; |
| INA NATV12-PP Cam Follower and Track Roller - Yoke Type | Ca:42.799 mm; P180°:34.7 kN; Labyrinth ring:2 x LOR 52; RG:3/8 NPT; A1:88.9 mm; Mass pillow block:17.9 kg; Pa:7.12 kN; Cap bolt recommended tightening torque:149.1 N·m; R2:22.225 mm; da:73.025 mm; |
| INA PWKR40-2RS Cam Follower and Track Roller - Stud Type | Basic dynamic load rating C:1400 kN; r2 min.:1.1 mm; Lubricant:Regular relubricatio; b1:10 mm; r1 min.:1 mm; M:8 mm; rb max.:1.1 mm; Design (sliding contact surface combination):Steel/steel, heavy-d; C:95.25 mm; d:127 mm; |
| 0.625 Inch | 15.875 Millimeter x 0.813 Inch | 20.65 Millimeter x 0.75 Inch | 19.05 Millimeter INA SCE1012-PPR Needle Non Thrust Roller Bearings | with tapered bore:1 800 min-1; Static (Cor):11.1 mm; B:86 mm; D:260 mm; with cylindrical bore:1 400 min-1; Pu:938 kN; d:120 mm; Grease:1180 kN; Oil:118.700 kN; Dynamic (Cr):6 mm; Size (mm):0.625 Inch | 15.875 Millimeter x 0.813 Inch | 20.65 Millimeter x 0.75 Inch | 19.05 Millimeter ; |
| 2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 2.126 Inch | 54 Millimeter INA 3312-2Z Angular Contact Ball Bearings | l5 ≈:45 mm; l7 min.:88 mm; B:55 mm; Basic static load rating C0:655 kN; α:6 °; Material constant KM:330; h1:295 mm; l3 min.:85 mm; d4 ≈:105 mm; C1 max.:48 mm; Size (mm):2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 2.126 Inch | 54 Millimeter ; |
| 5.512 Inch | 140 Millimeter x 7.48 Inch | 190 Millimeter x 1.969 Inch | 50 Millimeter INA SL014928-C3 Cylindrical Roller Bearings | B:34.1 mm; L:95 mm; Mass bearing unit:0.38 kg; Limiting speed:7000 r/min; Basic static load rating C0:7.8 kN; Basic dynamic load rating C:14 kN; N:12.3 mm; J:70 mm; Recommended diameter for attachment bolts, inch G:0.375 in; Bearing:YAR 205-015-2RF/VE49; Size (mm):5.512 Inch | 140 Millimeter x 7.48 Inch | 190 Millimeter x 1.969 Inch | 50 Millimeter ; |
| 0.669 Inch | 17 Millimeter x 1.85 Inch | 47 Millimeter x 0.874 Inch | 22.2 Millimeter INA 3303-J Angular Contact Ball Bearings | L:387.35 mm; Appropriate attachment bolt size G:0.75 in; R1:58.737 mm; Cap bolt recommended tightening torque:203.4 N·m; Ca:55.804 mm; Da:180 mm; N1:22.225 mm; End plug (suffix Y):EPR 12; PG:1/4 NPT; da:87.313 mm; Size (mm):0.669 Inch | 17 Millimeter x 1.85 Inch | 47 Millimeter x 0.874 Inch | 22.2 Millimeter ; |
| INA RCJT15/16-N Flange Block Bearings | B:120 mm; Tolerance shaft:h8; D:125 mm; Specific dynamic load factor K:140 N/mm²; Coefficient of friction µ max.:0.08; d:110 mm; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ min.:0.03; Tolerance housing:H7; Effective load carrying cross section A:12980 mm²; |
| INA TWC815 Thrust Roller Bearing | R1:44.45 mm; Cap bolt:2 x 1/2-13 UNC; H:157.162 mm; Bearing limiting speed:5600 r/min; P120°:16 kN; A1:79.375 mm; P60°:43.1 kN; h:36.513 mm; Bearing:22311 EK; Appropriate attachment bolt size G:0.625 in; |
| INA AS75100 Thrust Roller Bearing | Calculation factor f2C:1.08; Number of balls z:21; d1:41.6 mm; Attainable speed for grease lubrication:22000 r/min; Preload class A GA:60 N; Basic static load rating C0:6.2 kN; Calculation factor fHC:1; Calculation factor (back-to-back, face-to-face) Y2:1.41; Preload class B GB:120 N; rb max.:0.3 mm; |
| INA 03Y47 Thrust Ball Bearing | F:1231 mm; Limiting value e:0.3; Da max.:1546 mm; da min.:1154 mm; db min.:1239 mm; s max.:28 mm; Mass bearing:2270 kg; Axial load factor Y:0.4; Basic dynamic load rating C:15400 kN; D1 ≈:1440 mm; |
| INA WS81126 Thrust Roller Bearing | C:670 mm; da max.:1103 mm; rb max.:7.5 mm; Sealing solution:-; Lubricant:Maintenance free &nd; B:710 mm; ra max.:4 mm; r1 min.:4 mm; Mass plain bearing:4426 kg; dk:1312 mm; |
| 2.953 Inch | 75 Millimeter x 4.528 Inch | 115 Millimeter x 2.126 Inch | 54 Millimeter INA SL045015-PP-C3 Cylindrical Roller Bearings | T:1000 mm; Calculation factor Y0:2.2; r3,4 min.:12 mm; Comparative radial load rating CF:10600 kN; r1,2 min.:5 mm; D1 ≈:1500 mm; Calculation factor Y2:3.3; Design variant/feature:TQO.1/GWI; Fatigue load limit Pu:6950 kN; Basic dynamic load rating C:39100 kN; Size (mm):2.953 Inch | 75 Millimeter x 4.528 Inch | 115 Millimeter x 2.126 Inch | 54 Millimeter ; |
INA KR35-PP Cam Follower and Track Roller - Stud Type Video
INA KR35PP, KR35 PP, Stud Type Cam Follower
INA KR35 PP, Stud Type Cam Follower, 35 mm Roller Diameter; 16 mm Stud Diameter; M16X1.5 Thread; Slotted End; Needle Bearing Design. This order is for
Stud type track rollers - KR35-PP - medias - Schaeffler
Stud type track rollers KR35-PP, with axial guidance, plastic axial plain washers. Radial load Sealed on both sides Lifetime lubrication, freedom from
INA KR35PP Cam Follower, Stud Type, Sealed, Metric, Steel
INA KR35PP Cam Follower, Stud Type, Sealed, Metric, Steel, 35mm Roller Diameter, 18mm Roller Width, 32.5mm Stud Length, 52mm Overall Length, 16mm
Ina Stud Track Roller, Size 35 KR35-PP |
Order INA Stud Track Roller, Size 35, KR35-PP at Zoro.com. Great prices & free shipping on orders over USD50!
KR35-PP-A INA • ABF Store
KR35-PP-A INA available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8
KR35-PP INA Track Roller Bearing - BearingBoys
KR35-PP INA Track Roller Bearing (KR-PP Series) at BearingBoys - £39.93 exc VAT. Thread Dia (d1): 16mm, Outside Dia (D): 35mm, Length (B): 52mm,
Ina USA Corp. | KR35-PP-A | KR Series Stud Type Cam
Shop Ina USA Corp. KR35-PP-A at Applied.com, which includes; 35 mm Roller Diameter, 16 mm Stud Diameter, M16X1.5 Thread, Slotted End, Needle Bearing
INA (Schaeffler) - KR35-PP - Motion Industries
Buy INA (Schaeffler) Crowned & Flat Cam Followers KR35-PP direct from Motion Industries. Your proven service leader with reliable delivery since 1972