| No. | Brand | K | M | N | F | J | A | C | G |
| 3202-C3 | INA | - | - | - | - | - | - | - | - |
| PWTR45-2RS | INA | - | - | - | - | - | - | - | - |
| NATV5 | INA | - | - | - | - | - | - | - | - |
| SL184944-C3 | INA | - | - | - | - | - | - | - | - |
| WS81126 | INA | - | - | - | - | - | - | 670 mm | - |
| GIL20-UK | INA | - | - | - | 145 mm | - | - | - | - |
| GAR15-UK | INA | - | - | - | - | - | - | - | - |
| 3312-2Z | INA | - | - | - | - | - | - | - | - |
| 61800-2RSR-VA | INA | - | - | - | - | - | - | - | - |
| NATR10-X | INA | - | - | - | - | - | - | - | - |
| PAK1-1/4-206-N | INA | - | - | - | - | - | 320 mm | - | - |
| GIKR8-PB | INA | - | - | - | - | - | - | - | - |
| RSL185014 | INA | - | - | - | - | - | - | - | - |
| NATV5-X-PP | INA | - | - | - | - | - | - | - | - |
| SL183020-C3 | INA | - | - | - | - | - | - | - | - |
| KRVE40-PP | INA | - | - | - | - | - | - | - | - |
| 61807-2Z | INA | - | - | - | - | - | - | - | - |
| GAKL16-PW | INA | - | - | - | 766 mm | - | - | - | - |
| SL06016-E | INA | - | - | - | - | - | - | - | - |
| AS75100 | INA | - | - | - | - | - | - | - | - |
| INA GS81220 Thrust Roller Bearing | Pu:295 kN; Static (Cor):8.3 mm; with tapered bore:2 800 min-1; d:75 mm; Oil:40.870 kN; B:55 mm; rs (min):2.1 mm; D:160 mm; Dynamic (Cr):4.5 mm; Grease:354 kN; |
| INA GIHRK80-UK-2RS Spherical Plain Bearings - Rod Ends | J1:69.85 mm; L:419.1 mm; h:40.922 mm; Pa:20.2 kN; Initial grease fill:232.47 g; Adapter sleeve assembly:SNW 3026x4.5/16; P180°:72.5 kN; Bearing limiting speed:3600 r/min; P60°:178 kN; Cap bolt:5/8-11 UNC; |
| INA AS1024 Thrust Roller Bearing | r3,4 min.:2.1 mm; d:70 mm; Mass angle ring:0.34 kg; d1 ≈:97.4 mm; B1:10 mm; B2:18.5 mm; |
| 1.378 Inch | 35 Millimeter x 1.575 Inch | 40 Millimeter x 0.65 Inch | 16.5 Millimeter INA LR35X40X16.5 Needle Non Thrust Roller Bearings | B:25.00 mm; Grease Speed Rating n1:6700 rpm; Basic Static Radial Load Rating Co:31500 N; Oil Speed Rating n2:8000 rpm; Grease Speed Rating Open/Shielded n1:6700 rpm; Accessories:Snap-Ring; D:100.0000 mm; Oil Speed Rating Open/Shielded n2:8000 rpm; Basic Dynamic Radial Load Rating C:52700 N; d:45.000 mm; Size (mm):1.378 Inch | 35 Millimeter x 1.575 Inch | 40 Millimeter x 0.65 Inch | 16.5 Millimeter ; |
| 0.866 Inch | 22 Millimeter x 1.142 Inch | 29 Millimeter x 0.63 Inch | 16 Millimeter INA KZK22X29X16 Needle Non Thrust Roller Bearings | db min.:59.6 mm; Calculation factor f0:10.4; Mass bearing:0.15 kg; Da max.:75.4 mm; d1:62.7 mm; Attainable speed for grease lubrication:19000 r/min; d2:62.7 mm; Calculation factor f2B:1.07; Static axial stiffness, preload class D:140 N/µm; d:55 mm; Size (mm):0.866 Inch | 22 Millimeter x 1.142 Inch | 29 Millimeter x 0.63 Inch | 16 Millimeter ; |
| 2.756 Inch | 70 Millimeter x 3.948 Inch | 100.28 Millimeter x 1.181 Inch | 30 Millimeter INA RSL183014 Cylindrical Roller Bearings | Fatigue load limit Pu:1040 kN; Design variant/feature:TQOSN/GWOY; Calculation factor Y2:3.3; Basic dynamic load rating C:5280 kN; D:595 mm; D1 ≈:550 mm; Mass bearing:265 kg; T:368 mm; Comparative radial load rating CF:1290 kN; Calculation factor e:0.31; Size (mm):2.756 Inch | 70 Millimeter x 3.948 Inch | 100.28 Millimeter x 1.181 Inch | 30 Millimeter ; |
| INA 03Y47 Thrust Ball Bearing | F:1231 mm; Limiting value e:0.3; Da max.:1546 mm; da min.:1154 mm; db min.:1239 mm; s max.:28 mm; Mass bearing:2270 kg; Axial load factor Y:0.4; Basic dynamic load rating C:15400 kN; D1 ≈:1440 mm; |
| INA GIL6-UK Spherical Plain Bearings - Rod Ends | d:40.000 mm; Basic Static Radial Load Rating Co:16000 N; Oil Speed Rating n2:7500 rpm; Basic Dynamic Radial Load Rating C:54000 N; D:90.0000 mm; B:33.00 mm; Grease Speed Rating n1:6300 rpm; Fillet Radius ra:1.50 mm; |
| 0.276 Inch | 7 Millimeter x 0.394 Inch | 10 Millimeter x 0.413 Inch | 10.5 Millimeter INA LR7X10X10.5 Needle Non Thrust Roller Bearings | Inner ring LR series:LR 15x18x16.5; Basic static load rating C0:33.5 kN; Inner ring IR series:IR 15x18x16.5; Radial shaft seal with a low cross-sectional height, double lip:SD 18x24x3; Basic dynamic load rating C:16.1 kN; r min.:0.8 mm; Limiting speed:14000 r/min; D:24 mm; Fatigue load limit Pu:3.8 kN; Reference speed:11000 r/min; Size (mm):0.276 Inch | 7 Millimeter x 0.394 Inch | 10 Millimeter x 0.413 Inch | 10.5 Millimeter ; |
| INA NA22/6-X-2RSR Cam Follower and Track Roller - Yoke Type | C:203.2 mm; r3,4 min.:6.4 mm; r1,2 min.:25.4 mm; Calculation factor Y0:0.44; Basic static load rating C0:63000 kN; D:3835.4 mm; d:3378.2 mm; D1 ≈:3322 mm; Design variant/feature:TDOS.1; T:393.7 mm; |
| INA 04J02 Thrust Ball Bearing | Fillet Radius rb:0.040 in; Fillet Radius ra:0.08 in; d:5.000 in; D:7.0000 in; B:1.0000 in; Basic Static Radial Load Rating Co:91500 N; Basic Dynamic Radial Load Rating C:7800 N; Oil Speed Rating n2:5600 rpm; Grease Speed Rating n1:3400 rpm; |
| INA GS81228 Thrust Roller Bearing | Basic Static Radial Load Rating Co:58500 N; Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:3800 rpm; Accessories:One Seal; Oil Speed Rating n2:5000 rpm; d:60.000 mm; B:36.50 mm; Basic Dynamic Radial Load Rating C:70200 N; D:110.0000 mm; Grease Speed Rating n1:3800 rpm; |
| 1.575 Inch | 40 Millimeter x 3.543 Inch | 90 Millimeter x 1.437 Inch | 36.5 Millimeter INA 3308-2RSR Angular Contact Ball Bearings | Q180°:110 kN; P120°:190 kN; Bearing (basic designation):1313; Cap bolt, rec. tightening torque:80 N·m; A2:141 mm; Housing:SNL 216 RU; Mass housing:9 kg; Lock nut:KM 13; db:75 mm; End cover:ASNH 216 R; Size (mm):1.575 Inch | 40 Millimeter x 3.543 Inch | 90 Millimeter x 1.437 Inch | 36.5 Millimeter ; |
| INA NX20 Thrust Roller Bearing | Max. speed for PosiTrac Plus seal:575 r/min; Cap bolt, SAE grade:8; End plug (suffix Y):X-5217-2; Bearing:23056 CCK/W33; Initial grease fill:3515.4 g; R2:50.8 mm; Labyrinth ring:2 x LOR 606; J1:139.7 mm; H1:250.825 mm; P90°:400 kN; |
| INA LFR5206-25-2Z Cam Follower and Track Roller - Yoke Type | Fillet Radius ra:1.50 mm; Oil Speed Rating Open/Shielded n2:7500 rpm; Basic Static Radial Load Rating Co:36000 N; Grease Speed Rating Open/Shielded n1:6200 rpm; D:90.0000 mm; Accessories:Snap-Ring; d:40.000 mm; B:23.00 mm; Basic Dynamic Radial Load Rating C:46800 N; |
| 2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 1.811 Inch | 46 Millimeter INA SL192312-C3 Cylindrical Roller Bearings | Mass bearing:1.43 kg; H1:25 mm; Frictional moment:0.35 N·m; D:100 mm; Required attachment bolt size (DIN 912):M8; r3,4 min.:0.6 mm; Number of attachment bolts:7; Static axial stiffnes:1100 N/µm; Static moment stiffness:550 N·m/mrad; da min.:50 mm; Size (mm):2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 1.811 Inch | 46 Millimeter ; |
INA AS140180 Thrust Roller Bearing Video
INA AS140180 Thrust Roller Bearing Washer, Metric, 140mm ...
This INA AS-series axial roller bearing washer is designed for use with INA AXK-series axial needle roller and cage assemblies and INA K811-series axial ...Item Diameter: 180 millimetersBearing Type: Ball Bearing
INA - AS140180 - Thust Needle Roller Bearing/Access ...
INA AS140180. Mfr. Part #: AS140180 Allied Stock #: 72333963. Description. Thust Needle Roller Bearing/Access, 140mm ID, 180mm OD, 1mm W.
INA AS140180 | Turtle & Hughes
INA AS140180 Axial Bearing Washer, 140 mm ID x 180 mm OD, 1 mm W.
Needle Roller Thrust Bearing (INA (Schaeffler)) (AS140180)
Needle Roller Thrust Bearing (INA (Schaeffler)) (AS140180) ; Width(mm), 1 ; Outer Ring, No Outer Ring ; Precision (JIS), Grade 0 ; Size Standards, Metric System.Application: Thrust WasherSize Standards: Metric SystemAllowable Rotational Speed(rpm): 1800Total: $48.48
AS140180 INA - ABF Store
AS140180 INA. Axial bearing washers AS, suitable for AXK and K811, to DIN 5405-3/ISO 303. AS140180 INA. 1 pc in basket. Update. 1 pc on quote list
INA AS140180--LongTeng Bearing Co.,LTD
We supply the quality and original INA bearing. INA AS140180 are available stock, we are authorized agent of INA, for more details about INA Thrust roller ...
INA AS140180 - SP-SpareParts
Buy AS140180 manufactured by INA. Inner Diameter: 140, Outer Diameter: 180, Weight: 73.50. a.k.a. AS140180 (SKF),AS1128 (NTN),XWA14018001 (SKF).
AS140180 - INA | Thrust Roller Bearing | BDI USA
INA,AS140180..,140MM,Bore,1;,2;,180MM,Outside,Diameter;,1MM,Height;,Double,Direction;,Not,Self,Aligning;,Banded;,Thrust,Washer,Only.